Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

面向突发事件智能建筑管理系统的集成结构

为了实现面向突发事件的智能建筑管理系统(IBMS),提出了智能建筑突发事件的抽象模型、基本运算操作及优先权分配机制,并根据突发事件监控和管理的目标,提出了IBMS的"分布式虚拟应急中心"集成结构.     

危险品道路运输风险分级指数法研究

危险品道路运输过程风险影响因素多,随机性和不确定性大,定量风险评价比较复杂,至今没有统一的风险评估模型.为了有效预防危险品运输事故和进行快速风险评估,基于运输危险品本身特性和相关的风险影响因素探讨了运输危险品现实风险分级指数法.该方法由危险品风险分级指数、路线影响因素和安全措施补偿因子3部分构成.危险品风险分级指数由危险品加权平均风险等级和运输危险品量、泄漏点与居民区距离以及危险品扩散因子等级确定.危险品加权平均风险等级涉及其健康危害性、可燃性、化学反应活性以及特殊危险性(氧化性和与水反应性)等级的确定.路线影响因素包含运输道路特征、气象条件、交通状况和影响人员分布4类.安全措施补偿因子为车辆、设备、容器、包装因子,人员素质因子和安全管理因子3类.该方法可对运输危险品的潜在风险进行快速分级,有利于采取有效的安全预防和控制措施,降低运输事故概率和沿线影响人员风险.     

城市交通与环境可持续发展指标体系评估系统研究——上海案例应用

可持续发展是一种将社会发展概念从单纯经济增长拓展到经济、社会、环境协调发展的城市发展新模式.交通环境的可持续发展在整个发展体系中占据着重要地位.本文针对目前大城市普遍面临的交通环境压力和经济、交通与环境系统的复杂性,通过构建经济-交通-环境间的压力与响应关系,建立了可用于"回顾过去、解析现状、瞻望未来"的城市交通环境可持续发展指标体系.采用隶属函数对单项指标进行标准化处理,对交通环境可持续发展综合指数的评价,采用层次分析法确定各指标的权重.采用Visual Basic 6.0及Office的Access 2000,开发了交通环境可持续发展指标体系评估系统,并以上海市为案例进行了研究.本系统的开发可为城市交通环境可持续状况评价及发展对策的制定提供技术支持.     

城市天然气工程环境风险评价

结合广州、深圳、东莞、佛山等城市的天然气工程情况,对城市天然气工程的环境风险评价进行了讨论,并采用穆尔哈斯(Moorhowse)和普里恰特(Prichard)提出的热辐射预测模式和爆炸冲击波预测模式对城市天然气工程进行了风险评价.结果表明,如果发生天然气泄漏并引起火灾,假设在10 min以内,城市门站、调压站和城市高中压管道的火球对建筑物和设备的严重损害范围( A 级)最远距离分别为35.8 m、18.0 m和28.7 m,爆炸冲击波严重损害范围( C1 级)分别为距事故处54.8 m、27.8 m和44.4 m.最后从城市门站、调压站选址及输气管道选线、安全防范距离、作业过程中的风险控制与管理以及事故应急对策四方面提出了风险事故的防范措施与对策.     

基于SPA模型的煤矿瓦斯危险源风险评价

根据危险源理论和三类危险源的观点,采用集对分析(SPA)方法,进行了安全一事故集对的同异反分析,指出应采取措施控制不确定项,尤其要控制其中的第二类、第三类危险源才能使系统趋于安全状态;同时建立了煤矿瓦斯危险源风险评价模型,通过联系度的计算得出煤矿瓦斯的安全等级.研究表明,将集对分析方法应用于某煤矿瓦斯危险源风险评价,计算简单,结果较为精确、可靠,为不确定系统的评价提供了一条新思路.     

基于废陶瓷的多孔陶瓷研制及其对Ni2+的吸附性能

通过SEM、XRD、FT-IR表征及多孔陶瓷对废水中镍的去除能力,确定多孔陶瓷的制备条件:原料中田菁粉掺杂质量分数为4%,焙烧温度为800℃.SEM和孔结构表征说明,焙烧使多孔陶瓷形貌、结构发生变化;随着焙烧温度的升高,多孔陶瓷的比表面积和孔容呈现降低的趋势,而孔径呈现增大的趋势;EDS分析能表明,原废瓷粉和多孔陶瓷的主要元素组成均为Si、Al、O.SEM、XRD和FT-IR分析表明,多孔陶瓷吸附前后结构稳定.吸附Ni2+的系列实验表明,多孔陶瓷用量为10 g·L-1,吸附时间为60 min,进水pH值为6.32,进水Ni2+浓度在100 mg.L-1以内.在此条件下废水的Ni2+去除率可达89.7%,多孔陶瓷对废水中镍有较好的去除效果.以制备的多孔陶瓷处理含镍废水,考察多孔陶瓷对废水中Ni2+的吸附动力学和吸附等温线,结果表明,多孔陶瓷对Ni2+的吸附过程符合准二阶动力学模型(R2=0.999 9),Qe为9.09 mg·g-1;吸附过程可用Freundlich方程和Langmuir方程来描述,温度由20℃升高至40℃,最大吸附量Qm由14.49 mg·g-1上升至15.38 mg·g-1.     

Inhibition effects of aluminum dust explosions by various kinds of ammonium polyphosphate

In this work, vinyltriethoxysilane (A151) and 3-aminopropyltriethoxysilane (KH550) were used to modify ammonium polyphosphate (APP), showing that the dispersibility of APP could be improved remarkably by A151 and KH550. The maximum explosion pressure of aluminum dust explosion decreased with the addition of APP, A151-APP (APP-A) and KH550-APP (APP-B), with the exception of the case where the inerting ratio (α) of APP-A was less than 0.4. After the addition of APP-B, there was little difference in flame propagation behavior and explosion pressure compared with that of adding APP, indicating that APP-B could retain the inhibition performance of APP compared with APP-A. When the inerting ratios of APP, APP-A and APP-B were 1.2, 1.4 and 1.4, respectively, the aluminum dust explosion could be completely inhibited. The explosion residues of aluminum dust/APP mainly consisted of Al₂O₃, P-containing and N-containing compounds. It could be analyzed that APP exerted the inhibition effect through both chemical and physical effects.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.     

Experimental and theoretical research on the inhibition performance of ethanol gasoline/air explosion by C6F12O

The safety issue of ethanol gasoline and the methods to control or weaken its explosion have attracted attention. To clarify the effect of C₆F₁₂O (perfluoro(2-methyl-3-pentanone)) on the explosion of ethanol gasoline-air mixtures and intrinsic mechanism, the explosion overpressure and flame propagation behavior under different equivalence ratios (φ = 0.6–0.8) and C₆F₁₂O concentrations (χ_inh = 0–4.0%) were experimentally obtained. The detailed inhibitor reaction process was also obtained by CHEMKIN based on a new assembly kinetic mechanism. The results show that the effects of C₆F₁₂O on the explosion characteristics of ethanol gasoline varied with χ_inh and φ. For rich flames, C₆F₁₂O is more effective than and heptafluoropropane (C₃HF₇) and nitrogen (N₂) in suppressing explosions; for lean and equivalence ratio flames, the addition of C₆F₁₂O may result in more severe explosions. The decrease in chemical reactivity is mainly because the mole fractions of OH and H radicals and the proportion of paths H radicals involved decrease after adding C₆F₁₂O, and R1500: CF₃COF + H = CF₃CO + HF, R965: CF₂:O + H = CF:O + HF, R863: CF₃ + H = CF₂ + HF are main suppressing reactions.